Sign In | Join Free | My ccnmag.com
ccnmag.com
Shenzhen Topband Battery Co., Ltd
A professional manufacturer of LiFePO4 battery / lithium iron phosphate, decicated to designing, researching, manufacturing, and exporting LiFePO4 batteries( cell & pack & energy storage system) to
Home > Rechargeable Lifepo4 Battery >

3.2V 50Ah Rechargeable LiFePO4 Battery 2 Years Warranty and Low Self - Discharge

Shenzhen Topband Battery Co., Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Shenzhen Topband Battery Co., Ltd
Country/Region: China
Contact Person:Mr Jerry Yang

3.2V 50Ah Rechargeable LiFePO4 Battery 2 Years Warranty and Low Self - Discharge

Brand Name : Topband
Model Number : TB-A32173128E-Fe-50Ah
Certification : CE,UL,UN38.3,MSDS
Place of Origin : China
MOQ : 3000pcs
Price : Negotiable
Payment Terms : T/T, L/C
Supply Ability : 450Mwh/year
Delivery Time : 2~4weeks for samples; 4~6weeks for mass production
Packaging Details : standard export carton & pallet
Chemistry : LiFePO4
Norminal Voltage : 3.2V
Norminal Capacity : 50Ah
Weight : 1350±50g
Size : 32*173*128mm
Contact Now

3.2V 50Ah Rechargeable LiFePO4 Battery 2 Years Warranty and Low Self - Discharge

1. General

This product specification describes the technique standards, test methods and precaution notes of prismatic type Lithium iron phosphate rechargeable cell, manufactured by Shenzhen TOPBAND Battery CO.,LTD.

2. Product specification

No.itemstandardremark
2.1Nominal Capacity50Ah25±5℃,0.5C discharge
2.2Internal Impedance≤4mΩ
2.3Nominal Voltage3.2V
2.4Weight1350±50g
2.5Max charge Voltage3.65VAt CC mode
2.6End-of-charge Current0.05CAt CV mode
2.7Cut-off discharge Voltage2.00V
2.8Standard Charge Method0.5C CC/CV25±5℃
2.9Max continuous discharge current2CRecommend 1C
2.10Max pulse Discharge Current5CDischarge Time: 10 seconds
2.11Cycle Life2000cycles @100% DOD

At room temperature 25℃; 1C Continuous Discharge and 1C continuous charge current; ≥80% SOC

(100% DOD)

25±5℃

2.12Calendar Life8years
2.13Charging Temperature0~45℃
2.14Discharging Temperature-20~55℃
2.15Storage Temperature-10~30℃
2.16Terminal torsion≤5.5N·mLocknut is recommended
2.17AppearanceWithout break, scratch, distortion, contamination, leakage and so on
3. Test Conditions

3.1 Standard Test Conditions

3.1 All tests stated in this Product Specification are conducted at temperature 25℃±5℃ and humidity 15℅~90% RH, atmospheric pressure 86kPa~106kPa.

3.2 Standard Charge Method

The "Standard Charge" means in an ambient temperature of 25℃±5℃, the cell was discharged with 0.5C constant discharge current to cut-off voltage 2.0 V, standing 1h, then charged it with 0.5C constant current to 3.65V, then charge mode turn into CV mode, until the charging current is down to 0.05C, then end of charging and standing 1h.

4. Electrical Characteristics

itemTest methodCriteria

4.1 High

Temperature

Discharge Performance

The cell was charged in accordance with 3.2, and stored in an ambient temperature of 55℃±3℃ for 5h, then discharged to cut-off voltage with a constant current of 1C. After that, fetch out the cell and place it in the ambient temperature of 25℃±5℃ for 4h then check its appearance.

Capacity retention at 55℃

:≥95%

4.2 Low

Temperature

Discharge

Performance

The cell was charged in accordance with 3.2,and stored in an ambient temperature of -20℃±3℃ for 24 hours, then discharged to cut-off voltage 1.8 V at a constant current of 1C. After that, fetch out the cell and place it in the ambient temperature of 25℃±5℃ for 4hours, then check its appearance.

Capacity retention at -20℃

:≥70%

4.3 Rate Charge Performance

in Normal Temperature

Under the ambient temperature of 25℃±5℃

a. Discharged the cell with 1C constant current until the cut off voltage to 2.0V, stay for 1h.

b. Charged the cells with 2C constant current until the voltage to 3.65V, stay for 1h.

c. Discharged the cells with constant current until the cut off voltage 2.0V.

2C charge capacity≥80%
4.4 Rate Discharge Performance in Normal TemperatureThe cell was charged in accordance with 3.2, then discharge to cut-off voltage 2.0V with 3C current in an ambient temperature of 25℃±5℃.3C discharge capacity≥95%

4.5 Cycle Life

(25℃±5℃)

The cell was fully charged to 3.65V with 1C (cc/cv), after that stayed for 30min; Subsequently, the cell was discharged to cut-off voltage 2.0V with constant current 1C, and stayed 30 minutes; prior to next charge-discharge cycle. Record all the cycles until the retention capacity<80%.≥2000cycles
5. The performance test curve (for reference):



6. Environmental Characteristics


No

.


Item


Test Method


Criteria


6.1


Temperature shock test


A cell is charged in accordance with 3.2, and then repeat the following procedures for 5 cycles, then check the cell's appearance.



No leakage, no fire, no explosion, no vent


6.2


Low-pressure Test


The cell is charged in accordance with 3.2, then stored for 6h at a vacuum of -90KPa, after that put the cell in room temperature for 6h, then check the cell's appearance.


No leakage, no fire, no explosion, no vent


6.3


Vibration Test


The cell is charged in accordance with 3.2, and then installed onto the vibration machine. Equipment parameters of frequency and amplitude are set as bellow (the frequency is to be varied at the rate of 1oct/min between 10 and 55 Hz, and repeat vibration for 30 min. The cell is tested in three mutually perpendicular directions, i.e. X,Y,Z):

  1. frequency:10Hz~30Hz, amplitude: 0.38mm;
  2. frequency:30Hz~55Hz amplitude: 0.19mm

  1. No scratch, no fire, no explosion, no vent;
  2. The voltage is

not less than

3.2V.


6.4


Shock Test


The cell is tested in accordance with 3.2, and then secured to the testing machine by means of rigid mount which supports all mounting surfaces of the cell. Each cell shall be subjected to a total of three shocks of equal magnitude. The shocks are to be applied in each of three mutually perpendicular directions. The acceleration and impulse time are as follows: acceleration of impulse peak value: 100m/s2, shock frequency:40~80 times/min, impulse lasting time:16 min, shock times:1000±10


  1. No scratch, no leakage, no fire, no explosion, no vent;
  2. the voltage is not less than 3.2V.

7. Safety test

All below tests are carried out on the equipment with forced ventilation and explosion-proof device. Before test, all cells are charged in accordance with 3.2, and stored 24h prior to test.


No.ItemTest MethodCriteria

7.1


Short- circuit Test

The cell was charged accordance with 3.2, after that the cell is short-circuited by connecting the positive and negative terminals with a wire for 10min, the wire has a maximum resistance load of 5mΩ., then observe for 1h.

No fire, no explosion


7.2


Overcharge Test


The cell was tested in accordance with 3.2, then 1C constant current charged till the voltage reaches 1.5 times of the specified end-off charge voltage, or the charge time reaches 1h, then stop charge, and observe for 1h.


No fire,

no explosion


7.3


Over discharge test


The cell was tested in accordance with 3.2, then 1C discharge for 90min, then observe for 1h.


No fire, no explosion, no leakage


7.4


Crush Test

The cell was tested in accordance with 3.2, and then is placed on the crush machine, the axis is parallel to the crush equiment, and it is crushed between two flat surfaces till the crushing force is gradually approaching 200 kN, or voltage reaches 0V,or reaches 30% distortion, then observe for 1h.

No fire, no explosion


7.5


Impact Test

The cell was tested in accordance with 3.2, and then placed on the impact flat. A Φ15.8mm bar is to be placed on the center of the cell. A 9.1kg weight is dropped from a height of 610mm onto the cell, the distortion is allowed.

No fire, no explosion


7.6


Stick Test

  1. The cell was tested in accordance with 3.2
  2. use φ5mm~φ8mm high temperature

resistance steel needle, with speed of

25±5mm/s, to go through the cell from vertical

direction of pole plate, the penetrate position

should be close to the geometric center of plate

surface, the steel needle remains in the cell;


No fire, no explosion


7.7


Heating Test(130℃)

The cell was tested in accordance with 3.2, and then heated in a circulating air oven. The temperature of the oven is raised at a rate of

5℃ per minute to 130℃±3℃ and remain for 30

min.


No fire, no explosion


8,Dimension (Unit:mm)




Product Tags:

Lifepo4 Battery Pack

      

Lithium Iron Phosphate Cells

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

3.2V 50Ah Rechargeable LiFePO4 Battery 2 Years Warranty and Low Self - Discharge Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: Shenzhen Topband Battery Co., Ltd
Subject:
Message:
Characters Remaining: (0/3000)